Equipment
Ignition lock in assembly – 1 pc.
Key – 2 pcs.

Ignition lock:
No. of key positions: 4 (“III”; “0”; “I”; “II”)
Connector: 4 contacts, for the nut
Requirements:
1. Metal parts of the ignition lock shall be treated with anti-corrosion agents or made of corrosion-resistant materials. Surfaces of plastic parts shall be smooth, without bubbles, cracks and deformations affecting the use and appearance.
2. Key positions switching shall be precise and smooth, each fixed key position must be easily palpable. Insert and extracting of the key to be without jamming.
3. The key to be inserted and extracted from the switch only in position “III”. When extracting the key the steering lock is triggered.
4. The key is returned from position “II” into position “I” automatically after removing the force from the key.
5. The key from position “I” into position “II” to be re-turned upon the key turn into position “III”.
6. The keys supplied with the lock to have not less than 1000 different codes, i.e. a key with one code cannot open more than one lock of 1000. When supplied, key codes match in one batch is not allowed.
7. General technical requirement – according to QC/T 628-2014.