Components:
1. Kingpin (D=52 mm, L=242 mm) – 2 pcs.
2. Kingpin bearing with grease nipple – 2 pcs.
3. Bushing – 4 pcs.
4. Wedge bolt (with nut) – 2 pcs.
5. Oil seal – 2 pcs.
6. Banjo bolt – 2 pcs.
7. Grease fitting – 2 pcs.
8. Set of adjusting shims (8 pcs.)

Kingpin material requirements: 40X, 18KhGT steel (substitution is permitted upon agreement). Surface hardening with high-frequency current. Hardness according to HRC not less than 55 units.”